Specials.
For RX-5000.
Belts.
Other.
BL-Models.
Standard.
Armbases AX Range
(Tonearmbases for RX 1500/3000/5000, SX 8000, SX 5000II / 8000II drives, as well as DDX 1000 and DQX 1000 drives)
AST-1
Price: ???,??
Armstabilizer AST-1 for increasing the mass on the tonearm shaft,
Suppresses unwanted resonances, and thus completely
exhausts your tonearm in its possibilities.
Brass, Weight about 0.3 kg
For use on following tonearms: CF-1, CF-2, MA-707, MA-701, MA 505 and
MA 505S on the drives DDX-1000 and DQX-1000 and RX 3000 in connection
with the AX-1G or the Micro Seiki AX-1
For more info and buying: my-micro@micro-seiki.nl
Wall Mounting WM-1
Price: ???,??
Designed for MICRO SEIKI drives with an external motor base, such as
RX 1500/5000 with a total weight of up to 100kg.
Dimensions W 600 H 300 D 450. Dead weight (damped approx. 15 kg)
This wall attachment consists of square tube with an above-average
wall thickness. The overall concept is based on a three-point suspension.
There is a coupling on the wall, while the separate bases for the frame
and engine stand are decoupled by being stored on precisely
manufactured ceramic. Features such as a damped frame or finely
adjustable height adjustment of the separate bases for engine stand and
frame are self-evident. Surface-processed plywood bases can be
replaced by bases made of acoustically inactive stone.
The frame is black powder coated.
For more info and buying: my-micro@micro-seiki.nl
Belt BL-91
Price: ???,??
These belts correspond to the originals in all parameters.
"Only" the material is of higher quality, because it is more stable.
But also here applies: Change the belt with an average mileage at
least every 2 years!
For more info and buying: my-micro@micro-seiki.nl
Arm Stand
Price: ???,??
Safe storage for fully adjusted tonearms (to be used with the AX 50 MkII)
For more info and buying: my-micro@micro-seiki.nl
AX-50 Mk II
Price: ???,??
Aluminum 3D CNC milling from one block, Powder-Coated,
Weight approx. 7 kg Height adjustable,
For use on the RX 5000, with / without precision level additional
Insert base A 501 to be used for tonearms 9 "to 12"
For more info and buying: my-micro@micro-seiki.nl
AX-Wood four
Price: ???,??
Chrome-plated Brass, Weight approx. 1.5 kg
For use on wooden frame models of the BL and SX series from BL 91
E.g. BL 101, BL 111, SX 111 FV and SX 555 FVW
For tonearms with Leff 185-235 mm
E.g. SME 3009, 3009 II, 3009 II improved, 3009-R, 309, 309 II,
Series IV and Series V
For more info and buying: my-micro@micro-seiki.nl
AX-Wood zero
Price: ???,??
Chrome-plated brass, weight approx. 1.5 kg
For use on wooden frame models of the BL and SX series from BL 91
E.g. BL 101, BL 111 or also SX 111 FV and SX 555 FVW)
For more info and buying: my-micro@micro-seiki.nl
AX-RB25/30
Price: ???,??
Aluminum, Powder-Coated, Weight approx. 0.25 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II,DDX / DQX 1000
Finally, Rega arms can also be moved on the Micro players.
For this purpose, the corresponding base is provided with a VTA set that
enables the VTA: s to be continuously adjusted.
Simply screw the solid, black chrome leveler (gunmetal, approx. 200 gr) with
the matching, very fine internal thread onto the tonearm shaft - done.
The tonearm shaft with leveler is then inserted into the appropriate holder
of the base and fixed at the appropriate height.
The good thing about it: this process is reversible without damaging the tonearm.
For Rega tonearms RB 250 and RB 300
For more info and buying: my-micro@micro-seiki.nl
AX-k/l/a
Price: ???,??
Aluminum, Powder-Coated, Weight about 0.4 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II, DDX / DQX 1000
For Kuzma, Linn, Alphason arms etc.
E.g. Clearaudio Unify 9 ", Kuzma Stogi, Linn Ittok, and Alphason HR100.
This includes:1 x Allen screw plus matching washer for clamping
For more info and buying: my-micro@micro-seiki.nl
AX-DP6 12”
Price: ???,??
Brass, Powder-Coated, Weight approx. 0.7 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II and DDX / DQX1000
For Moerch DP6 tonearms in two versions - 9 "(brass) and 12" (aluminum)
For more info and buying: my-micro@micro-seiki.nl
AX-DP6 9”
Price: ???,??
Brass, Powder-Coated, Weight approx. 0.7 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II and DDX / DQX1000
For Moerch DP6 tonearms in two versions - 9 "(brass) and 12" (aluminum)
For more info and buying: my-micro@micro-seiki.nl
AX-DV507
Price: ???,??
Aluminum, Powder-Coated, Weight approx. 0.35 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II, DDX / DQX 1000
For Tonarm Dynavector DV 507 and MKII with standard arm plate.
This includes:1 x Allen screw plus matching washer for clamping
For more info and buying: my-micro@micro-seiki.nl
AX-DV505
Price: ???,??
Aluminum, Powder-Coated, Weight approx. 0.35 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II, DX / DQX 1000
For Tonarm Dynavector DV 505 only!
For more info and buying: my-micro@micro-seiki.nl
AX-8G
Price: ???,??
Brass, Powder-Coated, Weight approx. 1.0
For use mainly on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II
DDX / DQX 1000
For tonearms with Leff 200-262 mm
E.g. Micro MA 808X, MA 505XII, MA 505 MkIII, Max 237,
Audio Craft AC 3000MC
For more info and buying: my-micro@micro-seiki.nl
AX-7G
Price: ???,??
Aluminum, Powder Coated,
Weight approx. 1.5 kg / 2.1 kg, height approx. 25 mm
For use mainly on RX 1500 models
Special feature: The clamping takes place on two receptacles, thus weight
distribution and less stress on a damper, as well as excellent
resonance / vibration prevention, since it is connected to
the frame at two points.
This includes: 2 x screws plus matching washers for clamping
For more info and buying: my-micro@micro-seiki.nl
AX-6G
Price: ???,??
Brass, Powder-Coated, Weight approx.1.4 kg
For use mainly on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II
For tonearms with Leff 200-309 mm
E.g. Audio Technica AT 1501 II, AT 1501 III, Fidelity Resarch FR 66, FR 66 S,
MICRO SEIKI MAX 282, Luster GST 801, SEAC / WE 506/30
For more info and buying: my-micro@micro-seiki.nl
AX-5G
Price: ???,??
Brass, Powder-Coated, Weight about 0.9 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II DDX / DQX 1000
For tonearms with Leff 200-240 mm
E.g. Audio Technica AT 1503 II, AT 1503 III, AT 1100,Fidelity Resarch FR 64,
FR 64 S, FR 64 fx
For more info and buying: my-micro@micro-seiki.nl
AX-4G
Price: ???,??
Brass, Powder-Coated, Weight approx.1.4 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II
For tonearms with Leff 200-309 mm
E.g. SME 3012, 3012 II, 3012 II improved, 3012-R, 312
For more info and buying: my-micro@micro-seiki.nl
AX-4A
Price: ???,??
Aluminum, Powder-Coated, Weight approx. 0.33 kg
Primarily for use on DDX / DQX 1000 RX 1500/3000/5000
SX 8000 / 5000II and 8000II.
For tonearms with Leff 200-309 mm
E.g. SME 3012, 3012 II, 3012 II improved, 3012-R, 312
For more info and buying: my-micro@micro-seiki.nl
AX-2G
Price: ???,??
Brass, Powder-Coated, Weight approx. 0.65 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II DDX / DQX1000
For tonearms with Leff 185-235 mm
E.g. SME 3009, 3009 II, 3009 II improved, 3009-R, 309, Series IV and Series V
For more info and buying: my-micro@micro-seiki.nl
AX-2A
Price: ???,??
Aluminum, Powder-coated, Weight approx. 0.2 kg
For use on RX 1500/3000/5000 / SX 5000II / 8000 / 8000II DDX / DQX 1000
For tonearms with Leff 185-235 mm
E.g. SME 3009, 3009 II, 3009 II improved, 3009-R, 309, 309 II,
Series IV and Series V
For more info and buying: my-micro@micro-seiki.nl
AX-1G
Price: ???,??
Brass, Powder-coated, Weight about 0.75 kg.
For use on:
RX 1500/3000/5000 / SX 5000II / 8000 / 8000II / DDX / DQX 1000
For standard tonearms with Leff 200-237 mm
For more info and buying: my-micro@micro-seiki.nl